1 user
Continue Wishlist
Getting Started Guide
Help Center
Contact us
Doist Blog
Privacy
Security
Terms of Service
What's new: Channel Descriptions
Login
Signup
question about old television
I have a very old television that was given to me a few years ago, from its appearance it's probably from the 1970s, but has worked fine. I unplug it ...
0
753
Outlook question help and information.
11:33 PM
What can I replace a 6v 4a AC adapter with?
My USB Hub requires a 6v 4a adapter. As shown in image. What can I replace this with because it is extremely difficult to find a 6v 4a. On tight budge ...
0
753
remote stay or go light
Hi guys.
I am new to the site.not very electronic savy.i require a stay or go red and green light on a loading bay in a factory.controled by a remote ...
0
753
Cut power to live circuit and can't get back
Hello - I have a run of string lights setup to the roof of my warehouse and, as we were doing some remodeling, someone cut off the female end of the r ...
0
753
Bulb blowing regularly.
Please I sort to know why a bulb in a particular lighting point in my house keep on blowing regularly while other bulbs are still there very healthy. ...
1
753
Using (3) Single Phase Transformers for 3 Phase 240/480
I have 3 1KVA Transformers. Acme T 2 53010 S model. I want to transform 240V 3 phase to 480V Three phase. I wired each transformer as 240/480, and the ...
0
753
240v to 120v
I have a 240v double pole breaker that was dedicated for an air conditioner. It had 3 wires going to it running through the wall - neutral, hot and gr ...
0
753
Dead Circuit---Need HELP!!!
I have an exhaust fan and lights for the hood over my stove. It has two rotary switches to turn on the lights and vary the fan speed.
With no notice w ...
0
753
3-way switch 2 fixtures
Hello. I would like to wire a 3-way switch to 2 fixtures but not in the usual way. I want to wire so that in one position one fixture is on and in the ...
0
753
Non-dimmable light in dimming fixture - Help!
Father in law put a non-dimmable light into a dimming fixture and it started smoking. He replaced the bulb with a dimmable light and called it a night ...
0
753
Associate Engineer
Arduino Code Serial Communication
