I have a myRio which shows up on Max and has the software installed. I can even run programs on the FPGA and processors fine.
What I cannot appear to do is when connected by the USB cable, manage to use the web browser to get to the IP 172.11.11.2.
I have pinged that IP and it replies fine but when i put that in the web browser I get nothing. Says the URL could not be found.
I assume this is the say to setup the WIFI since it said so in the instructions. Also in Max I can see things under System Settings - shows IP 172.22.11.2 and 0.0.0.0 for Wireless, DNS Name etc but when I select Network settings it says no adapters found.
Do you have the recommended software set installed on the myRIO (either through MAX or the Getting Started Wizard)? You'll need the
[url=http://zone.ni.com/reference/en-XX/help/371361G-01/lvhowto/ni_webconfig/]NI Web-Based ConfigurationLet us know if that help or if you have follow up questions.
Recommend to read:
[url=http://www.theengineeringprojects.com/2016/07/configure-myrio-wifi.html]HOW TO CONFIGURE NI MYRIO ON WIFI