Hello Everyone! Happy to see you here. I welcome you on board. In this post today, I’ll be discussing the Introduction to BC558.
BC558 is a bipolar junction transistor used for amplification and switching purposes. It belongs to the PNP transistor family and is available in a TO-92 package. It contains collector current 100mA, indicating it can drive load under 100mA.
I've previously detailed the Introduction to BC640 & BC327.
I suggest you read this entire post as I will cover a complete introduction to BC558 explaining pinout, working, power ratings, physical dimensions, datasheet, a ...
Hi Guys! Hope this finds you well. I welcome you on board. Thank you for clicking this read. In this post today, I’ll be explaining the Introduction to BC559.
BC559 is a bipolar junction transistor used to drive loads under 100mA. It falls under the family of PNP transistors and is mainly known as a current-controlled device. Where small current at one terminal is used to drive large current change at the remaining two terminals.
Read this post all the way through, as I’ll be touching pinout, working, datasheet, physical dimensions, power ratings, and applications of a BC559 transistor.
Le ...
Hello Friends! Hope this finds you well. I welcome you to another addition to the introduction series. In this post today, I’ll be discussing the Introduction to BC560.
BC560 is a general-purpose transistor mainly used to drive loads under 100mA as it carries collector current 100mA. It falls under the category of PNP transistors and is mainly used for amplification and switching purposes.
I suggest you read this entire post as I’ll detail everything about BC560 transistor covering pinout, working, power ratings, applications, and physical dimensions.
Continue reading.
Introduction to BC560 ...
Hi folks! Hope you’re well today. I welcome you on board. In this post today, I’ll detail the complete Introduction to BC517.
BC517 is an NPN bipolar junction transistor made up of silicon material and comes in a TO-92 package. It carries collector-current 1A, projecting it can drive loads under 1A. Total power dissipation is 625mW, indicating it releases power around 625mW while working. Collector-emitter and collector-base voltages are 30 and 40 respectively. The emitter-base voltage is 10V which means it requires only 10V to trigger the electron action inside the transistor.
Read this po ...
Hi Guys! Hope you’re well. I welcome you on board. Thank you for viewing this read. In this post today, I’ll walk you through the Introduction to BC557.
BC557 is a bipolar junction transistor with DC current gain 300. It falls under the category of PNP transistors where one N-doped layer stands between the two P-doped layers. The continuous collector current is 100mA means it can drive load under 100mA. BC557 comes in the TO-92 package and is mainly used for switching and amplification purpose.
Before I bore you to tears, let’s dive in and read the complete introduction to BC557 covering da ...