Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at detailed Introduction to MCP23008. MCP23008 provides an 8-bit parallel input/output expansion for I2C bus and SPI applications. It has 8-bit configuration registers for input, output and polarity changing. The master device can enable input and output pins of MCP23008 by writing the Input/output configuration bits. A polarity of the input port register can be inverted with the polarity of the inversion register and all registers can be read by the system master.
MCP23008 is used in different indust ...
Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at a detailed Introduction to MAX30100. MAX30100 is a heart pulse rate monitor sensor. This sensor consists of two Light Emitting Diodes (LEDs), (one emits infrared light and the other emits red light) modifiable optics, low noise signal processor that detects heart pulse rate signal. Its operating voltage is from 1.8v to 3.3v.
The MAX30100 is used in different industrial and medical equipment such as fitness measurement devices, medical devices, and different wearable instruments. In today's post, ...
I hope you all are doing great. In today's tutorial, we are gonna have a look at detailed Introduction to ESP-01. ESP-01 is an inexpensive, small-sized WiFi module, which consists of TCP/IP stack along with a built-in microcontroller. So, we can directly program this small chip and can bring WiFi capability in our Embedded projects. When first time this ship came into the market in August 2014, it got a lot of attention by users. The main reason for it to seek attention is that this module allows the microcontroller to connect with a WiFi available (and programmed to connect) and it follows Ha ...
Hello friends, I hope you all are doing great. In today’s tutorial, we are gonna have a look at detailed Introduction to RN4020. RN4020 is a completely licensed Bluetooth category 4.1 low energy consuming unit. This module is surfaced with the Bluetooth which is organized by Unpretentious ASCII instructions by UART interfacing. It also comprises all Bluetooth SIG sketches and (MLDP) Microchip low Energy data for customized data.
The scripted features can be secondhand to allow unconnected process without any Microcontroller or mainframe computer. It can be controlled from a distant pos ...
Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at detailed Introduction to MPR121. MPR121 is a touch sensor controller, its working is like the capacitor's working principle. This module has twelve electrodes points, it communicates via I2C protocol. When any objects come closer to an electrode point, we can observe the presence of an object by variation in capacitance of an electrode. It's working voltage should be between 2.5 to 3.6 VDC.
MPR121 is used in different industrial projects and electronic devices such as mobile phone and remote cont ...