The Engineering Projects

Introduction to 2n4401

Hey Everyone! I hope you are doing great and having fun with your lives. I am back to give you a daily dose of information so you can grow and progress in your relevant field. Today, I am going to uncover the details on the Introduction to 2n4401. It is an NPN (negative-positive-negative) bipolar junction transistor (BJT) which is used for general purpose amplification and switching purpose. It consists of P doped semiconductor that exists between the two layers of N doped material. I'll give you a brief detail about this transistor so you don't have to go anywhere for finding the information regarding this transistor. You can also check the Introduction to 2n4402 which is a complementary PNP transistor of this NPN transistor. Let's get started.

Introduction to 2n4401

• 2n4401 is an NPN bipolar junction transistor which is used for general purpose amplification and switching purpose.
• It is called bipolar junction transistor because conduction is carried out by both charge carriers i.e electrons and holes, but majority charge carriers will be electrons.
• It mainly consists of three terminals called emitter, base, and collector.
• Small current present at the base side is used to control the large current at the emitter and conductor side.

• P layer of this transistor represents the base terminals while other two N layers represent emitter and collector respectively. Base is positive with respect to emitter.
• 2n4401 is actually a current control device where small current at the base side is used to control the large current at the emitter and collector side.
• When a positive voltage is applied at the base side, it gets biased and allows the current to flow from emitter to collector.
• The emitter emits the electrons which are then collected by the collector and base controls the number of electrons.
• A transistor is a combination of diodes joined back to back.

2n4401 Pinout

2n4401 is an NPN transistor which mainly consists of three terminals. 1: Emitter 2: Base 3: Collector

• Base side of this transistor is lightly doped while emitter side is heavily doped.
• When small current controls the large current at the emitter and collector, this process is used for amplification purpose.

Circuit Diagram of 2n4401

Circuit diagram of 2n4401 is shown in the figure below.

• The voltage at the collector side is more than the voltage at the base side.
• This transistor comes with three main configurations i.e common base configuration, common emitter configuration, and common collector configuration.
• Common emitter configuration is mainly used for amplification purpose because it exhibits the required voltage and power gain for amplification purpose.
• This configuration helps in increasing the input signal by 20dB which is nearly 100 times more than the input signal.
• Emitter current is the combination of base and collector current.
• Collector and emitter can be differentiated by their size and doping concentration. The emitter is highly doped while the collector is lightly doped.
• The forward current gain of the transistor can be denoted by beta ß which is a ratio between collector current and base current. This beta is actually an amplification factor which is a measure of current being amplified. Beta value ranges between 20 to 1000 but its standard value is 200. Beta is a ratio of two current so it has no unit.
• The current gain of this transistor is represented by alpha a which is a ratio between collector current and emitter current. Alpha value ranges between 0.95 to 0.99 and most of the times its value is considered as a unity.

Absolute Maximum Ratings of 2n4401

Absolute maximum ratings of 2n4401 is shown in the figure below.

• Collector-Emitter and Collector-Base voltages are 40 and 60 V respectively.
• If stresses are exceeded above these absolute maximum ratings, they can damage the device.
• Similarly, if stresses are applied for the extended period of time, they can affect the device reliability.

Difference between NPN and PNP transistors

• The main difference between NPN and PNP transistor is the availability of charge carriers. Electrons are majority charge carriers in case of NPN transistor while holes are majority charge carriers in case of PNP transistors.
• Most of the professional prefer NPN transistor over PNP transistor because conduction carried out by the mobility of electrons is better than conduction through mobility of holes.
• These NPN and PNP bipolar junction transistors are current controlled devices and are different than unipolar MOSFET that is a voltage controlled device.

Applications

• This transistor is mainly used for general purpose amplification.
• In many applications, this transistor behaves as a simple switch. When a voltage is applied at the base side, it gets biased and transistor behaves as an ON switch. When there is no voltage at the base side, it won't get biased and the transistor behaves as an OFF switch.

That's all for today. I hope you have enjoyed the article. I always try to give you information based on recent topics so you keep coming back for what we have to offer. If you feel skeptical or have any question, you can ask me in the comment section below. I'll try my best to help you in this regard according to best of my expertise. Stay tuned!

Introduction to 2n2905

Hey Everyone! I hope you all are doing great and enjoying life. I am back to give you daily dose of some valuable information so you can progress and grow in your relevant field. Today, I am going to unlock the details on the Introduction to 2n2905. It is  a PNP (Positive-negative-Positive) bipolar junction transistor (BJT) which is mainly used for general purpose and switching applications. In this transistor, N doped semiconductor exists between the two layers of P doped material. I am going to give you brief details about this transistor. Let's get started.

Introduction to 2n2905

• • 2n2905 is a PNP bipolar junction transistor which is mainly designed for general purpose, small signal and switching applications.
  • It comes in TO-39 casing and consists of three terminals called emitter, base and collector.
  • N side represents the base of the transistors while other two P layers represent emitter and collector respectively.
  • N represents the polarity at the base side which is negative and P represents the polarity at the emitter side which is positive.
  • In order to flow current, base must be negative with respect to emitter.

• As it is a bipolar junction transistor so conduction is carried out by both charge carriers i.e. electrons and holes but majority charge carriers will be holes.
• Collectors-Base junction will always be reverse biased so opposite polarity must be required at the collector side.
• Base is negative with respect to emitter and collector will be more negative with respect to base.
• Small current at the base side is used to control large current at the emitter and collector side but majority charge carriers will be holes.

2n2905 Pinout

2n2905 is a PNP transistor which mainly consists of three terminals. 1: Base 2: Collector 3: Emitter

• This transistor is considered as a current controlled device where small current at the base side is used to control large current at the emitter and collector side.
• Emitter is highly doped while base will be lightly doped.

Circuit Diagram of 2n2905

Circuit diagram of this transistor is shown in the figure below.

• Current at the emitter side is equal to the sum of current at the base and collector side.
• Main difference between emitter and collector is their size and doping concentration. Emitter is highly doped while collector is lightly doped.
• Conduction is carried out by movement of both electrons and holes but majority charge carriers will be holes which will be collector by the collector.

Absolute Maximum Ratings of 2n2905

Absolute maximum rating of 2n2905 is shown in the figure below.

• Power dissipation is about 600mW.
• Collector-Base voltage and Collector-Emitter voltage is -60 and -40 respectively.
• These are the stress ratings. It is important to note that if stresses are exceeded above these absolute maximum ratings, they can damage the device at large.
• Also, if these stresses are applied for extended period of time, they can effect the device reliability.

Difference Between PNP and NPN Transistors

• Main difference between NPN and PNP transistors is the medium used for conduction. Electrons are majority charge carriers in case of NPN transistors while holes are majority charge carriers in case of NPN transistors.
• Most of the professional intend to prefer NPN over PNP transistors because they think that conduction carried out by mobility of electrons is better than conduction by the mobility of holes.

Combination of NPN and PNP Transistors

• Combination of NPN and PNP transistors can be used in most applications.
• If NPN are combined with PNP transistors, they can be used to design a power amplifier circuit with ideal output.
• Combination of these transistors can be used in Class B amplifiers where both transistors are used to control the current flowing in both directions at any instant of time.
• In Class B amplifiers both NPN and PNP transistors function in a similar fashion. PNP transistors conduct for the negative half cycle of the transistor while NPN conducts for the positive half cycle of the transistor.
• This helps in getting the power at output load in both directions.
• Transistors are termed as Complementary transistors which use the combination of both NPN and PNP transistors of identical characteristics.

Applications

• These transistors are used for high speed switching applications.
• Military and other high reliability driver applications involve these transistors.

That's all for today. I hope you have enjoyed the article. If you have any question, you can ask me in the comment section below. Your suggestion and feedback will be highly appreciated as it will allow us to provide you quality work that resonates with your needs and expectations. Stay Tuned!

Introduction to 2n2907

Hey Guys! Hope you are doing great. I always try to fill your appetite with relevant information you can excel and grow in your field. Today, I am going to unlock the details on the Introduction to 2n2907. It is basically a PNP bipolar junction transistor (BJT) which is mainly designed for switching and low power general purpose amplification applications. It has an ability to operate at very high speed and moderate temperature. I'll try to cover every aspect related to this transistor, so you don't have to go anywhere else for finding the information regarding this transistor. You can also check Introduction to 2n2222 which is complementary NPN transistor of this PNP transistor. Let's hop on the board and explore what it does and what are its main applications. Let's get started.

Introduction to 2n2907

• 2n2907 is a PNP bipolar junction transistor which is mainly used for low power general purpose amplification and switching application.
• In this transistors, N layers is composed of semiconductor material which exists between the two layers of P type material.
• N side represent the base side and polarity will be negative at the base side.
• P side represents the emitter terminal and polarity at the emitter side will be positive.
• In order to conduct, base must be negative with respect to emitter.
• And collector-base junction will always be reverse biased so polarity must be reversed at the collector side. Collector is more negative with respect to base terminal.

• This transistor is a bipolar device, so conduction will be carried out by both charge carriers i.e. holes and electrons but majority charge carriers will be holes in this case.
• PNP and NPN transistors work in a similar fashion with some exceptions i.e. voltage polarities and current directions will be reserved in case of PNP transistors as compared to NPN transistors.
• Base is negative is PNP transistor while it is positive in case of NPN transistors.
• These transistors are termed as current controlled device because small current at the base side is used to control large current at the collector and emitter side.
• When we apply voltage at the base side it gets biased, and it allows the electrons to flow from emitter to collector.
• In case of PNP transistor, current will flow from emitter to collector but majority charge carriers will be holes which are then collected by the collector.

2n2907 Pinout

This transistors mainly contains three terminals 1: Emitter 2: Base  3: Collector

• The ability of base current to control large current at the emitter and collector side is used for amplification purpose.
• Emitter will be highly doped and base will be lightly doped.
• Collector and emitter are different to each other with respect to their size and doping concentration. Collector will also be lightly doped as compared to emitter.

Circuit Diagram of 2n2907

Following figure shows the circuit diagram of 2n2907.

• Current at the emitter side is the combination of base and emitter current.
• This transistor comes in TO-92 casing and can be manufactured with different pin configurations.
• In case of PNP transistor, holes are transferred internally which then allow the current to flow in the external circuit. In case of NPN transistors, electrons flow externally and conduction is carried out from emitter to collector.
• Both NPN and PNP transistor work in a same fashion but medium used for conduction is different. Most of the professionals prefer NPN transistors over PNP transistors because they consider, conduction through mobility of electrons is better than conduction through mobility of holes.
• However, both transistors come with a lot of advantage and can be used for similar applications.

Absolute Maximum Ratings of 2n2907

Following are the absolute maximum ratings of 2n2907

• These are the stress rating above which device can be completely damaged.
• Similarly, if stresses are applied for extended period of time, they can harm the device reliability. It is advised to keep the operating conduction within the range of absolute maximum ratings.

Combination of NPN and PNP Transistors

• Both NPN and PNP transistors are used in combination with each other.
• These transistors are incorporated perfectly to design a power amplifier output circuit which helps in generating the ideal output.
• Transistors that used combination of NPN and PNP transistos are called Complementary Transistors.
• Both NPN and PNP transistors  are widely used in Class B amplifiers where both transistors help in controlling the current flowing in both directions at any time.

Applications

• This transistor is mainly used for switching and linear amplification.
• Analog amplification also involve this type of transistor.

That's all for today. I always try to give information in sorted form so it makes a direct connection with the reader and makes it easy for him the digest the information without much effort. If you feel any doubt or have any question you can ask me in the comment section below. I'd love to help you according to best of my expertise. Stay tuned!

Introduction to 2n5401

Hey Fellas! I hope you are doing great and getting most out of your lives. Today, I am going to uncover the details on the Introduction to 2n5401. It is a PNP(positive-negative-positive) bipolar junction transistor which comes in TO-92 casing. It consists of N doped semiconductor that exists between the two layers of P doped material. It is useful for the applications where regulated negative voltage is required at a modest current level. I'll give you brief details about this amplifier transistor. Let's get started.

Introduction to 2n5401

• 2n5401 is a PNP bipolar junction transistor, also known as amplifier transistor, that comes with collector-emitter voltage of 150V and mostly used for amplification purpose.
• In order to operate this transistor properly in the circuit, no external components are required.
• Most of the professionals prefer this device over common resistor/zener approach.
• It exhibits current limiting and thermal shutdown which make the device substantially rugged.
• It consists of three terminals named as emitter, base and collectors.
• Small current at the base side is used to control the large current at the emitter and collector side.

• It is a bipolar junction transistor where conduction is carried out by both electrons and holes but majority charge carriers are holes.
• As it a PNP transistor so P side represents the polarity at the emitter side which is positive and N represents the polarity at the base side which is negative.
• Base will always be negative will respect to emitter.

2n5401 Pinout

2n5401 is a PNP transistor which mainly consists of three terminals.   1: Emitter 2: Base 3: Collector 

• Conduction is carried out from emitter to collector and majority charge carriers will be holes rather than electrons.
• Transistor works in a way, it allows small current at the base side to control large current at the emitter or collector side.

2n5401 Circuit Diagram

Circuit symbol of 2n5401 is shown in the figure below.

• Emitter polarity will be positive as compared to base and collector.
• Conduction is carried out when base will be negative as compared to emitter.
• Emitter current is the sum of current at the base and collector side.
• PNP works in a similar way like NPN transistors with some exceptions. In PNP transistors, directions of current and voltage polarity will be reversed and majority charge carriers will be holes.
• Some professionals NPN transistors over PNP transistors, because conduction through mobility of electrons is better than conduction through mobility of holes.

Absolute Maximum Ratings of 2n5401

Following shows the absolute maximum ratings of 2n5401.

• Collector-Emitter voltage and Collector-Base voltages are 150 and 160 V respectively.
• Total power dissipation at the collector side is 625 mW.
• These are the stress rating. If stresses are exceeded from given absolute maximum ratings, they can damage the device.
• Similarly, if stresses are applied for extended period of time, they can effect the device reliability.

Transistors as a Matched Switch

• PNP transistors widely replace NPN transistors in some applications because both exhibit same properties with some exception i.e. direction of current and polarities of voltage will be reversed.
• Both PNP and NPN transistor can be used for switching applications.
• PNP and NPN transistors can be incorporated in a same circuit to design the power amplifier circuits.
• Class-B amplifiers are incorporated with two pairs of PNP and NPN transistors where both transistors are used to control the current flowing in both directions.
• Transistors are termed as "Complementary Transistors" which use both pair of PNP and NPN transistors.
• Both NPN and PNP transistors work in a similar fashion i.e. PNP conducts for the negative half cycle of the transistor while NPN conducts for the positive half cycle of the transistor. This process helps in flowing the power at the load output in both directions.
• Main difference between PNP and NPN transistor is that current will sink to its base side in case of PNP transistor while current will source from base to the transistor in case of NPN transistor.

Applications

• It is mainly used for general purpose amplification and switching purpose.
• Telephony applications involve these NPN transistors.
• These transistors cannot be used in life support appliances because any defect in these transistors can cause the personal injury.

That's all for today. I hope you have enjoyed the article. However, if still you feel skeptical or have any question, you can ask me in the comment section below. I'll try my best to help you according to best of my expertise. We always aspire to give you knowledge that resonates with your needs and requirements. Stay tuned!

Introduction to 2sa1015

Hello Fellas! I aspire a happy and prosperous life for you. We always enjoy when you keep coming back for what we have to offer. Today, I am going to unlock the details on the Introduction to 2sa1015. It is a low frequency PNP (positive-negative-positive) bipolar junction transistor which is mainly used for general purpose amplification. It mainly consists of N doped semiconductor which exists between the two layers of P doped material. I'll try to cover every aspect of this transistor so you don't have to go anywhere else for finding the information regarding this transistor. Let's hop on the board and explore the details on this PNP transistor.

Introduction to 2sa1015

• 2sa1015 is a PNP low frequency transistor which is mainly used for general purpose amplification.
• It mainly consists of three terminals called emitter, base and collector.
• N layer of this transistor represents the base side while other two P layers represent emitter and collector receptively.
• Base is always negative with respect to emitter.
• As it is bipolar junction transistor so conduction is carried out by both charge carriers i.e. electrons and holes, but majority charge carriers will be holes.

• When negative voltage is applied at the base side it gets biased and current starts to flow from emitter to collector.
• It is referred as a current control device because small current at the base side is used to control the large current at the emitter and collector side.
• In this PNP transistors P layer shows the polarity applied at the emitter side which is positive while N side shows the polarity at the base side which is negative.
• Current will only flow when base is negative with respect to emitter.

2sa1015 Pinout

This PNP transistor mainly consists of three terminals. 1: Emitter  2: Base  3: Collector

• Base side is lightly doped while emitter side is heavily doped.
• Difference between emitter and collector is their size and doping concentration. Emitter is heavily doped while collector is lightly doped.

Circuit Diagram of 2sa1015

Following figure shows the circuit diagram of 2sa1015 PNP transistor.

• Current at the emitter side is the sum of current at base and collector side.
• Current will flow from collector to emitter and majority charge carriers will be holes.
• This transistor is referred as a current controlled device where small current at the base side is used to control large current at the emitter and collector side.

Absolute Maximum Ratings of 2sa1015

Following figure shows the absolute maximum ratings of 2sa1015.

• Collector-Base and Collector-Emitter voltage is -50.
• And maximum collector power dissipation is 400 mW.
• These are the stress rating above which device can damage.
• If stresses are applied for extended period of time, they can effect the device reliability.

Difference between PNP and NPN Transistors

• Both NPN and PNP works in a similar way with some exceptions. Voltage polarity and current directions will be reversed in case of PNP transistors as compared to NPN transistors.
• In case of PNP transistor, current will sink to its base side while in case of NPN transistor, base sources current to the transistor.
• Most of the professionals prefer NPN transistor over PNP transistors because they consider conduction through mobility of electrons is better than conduction through mobility of holes.

Transistors as a Matched Switch

• Both NPN and PNP transistors behave like a switching devices.
• You might come across an idea what is the purpose of using PNP transistors while there are already tons of NPN transistors out there which can be used for amplification. However, when PNP transistors are used in combination with NPN transistors, they help in designing the perfect power amplifier circuit.
• Class B amplifiers widely use combination of both NPN and PNP transistors where both transistors are used to control the current flowing in both directions at any time.
• Transistors are called complementary transistors which use both NPN and PNP transistors of same characteristics.
• In Class B-amplifiers, both NPN and PNP transistors work in a same fashion i.e. NPN transistors conducts for the positive half cycle and PNP transistor conducts for the negative half cycle of the transistor. This results in flowing the power at the load output in both directions.

Applications

• These transistors are widely used for voltage and power amplification.
• When these transistors are incorporated with NPN transistors, they construct a perfect bond and current starts to flow from both sides of NPN and PNP transistors.

I always try to give the information that builds a direct connection with reader and makes it easy for the reader to grab the concept and implement it. However, if you have better approach you think can work, you can suggest me in the comment section below. If you have any question or query you can ask me, I'd love to help you according to best of my expertise. Stay tuned!

Introduction to 1n914

Hello Everyone! I always love to keep your stomach filled with useful information so you can excel and grow in your relevant field. Today, I am going to reveal the details on the Introduction to 1n914. It is a small signal diode that allows the current to flow in one direction and blocks the current in other direction. It features operating junction temperature of 175 ºC and forward surge current of 4A. It is widely used for industrial and power management applications. I'll give you a brief details about this diode, so you don't have to go anywhere else for finding the information regarding this small signal diode. Let's get started.

Introduction to 1n914

• 1n914 is a small signal diode that is widely used in portable devices.
• It exhibits zero resistance in one direction and maximum resistance on the other direction, so current will flow in one direction only.
• This unidirectional behavior is sometimes referred as a rectification which is an ability to convert AC current to DC current.
• This diode is also termed as a electronic version of check valve.
• It is basically a polarized components which consists of two terminals called anode and cathode.
• Normally silver mark shows the cathode side of the diode.
• It will only conduct when there is some form of threshold voltage present in its forward biased mode.
• It will seize the current to flow in reverse biased mode.

• Normally diode exhibit non linear current-voltage characteristics, however these non-linear characteristics can be customized by using a specific semiconductor and doping impurities that are diffused in the diode material during the manufacturing process of diode.
• These diodes are widely used for power conversion. Rectifiers are made from diodes which convert AC current to DC current and provide better performance.
•  Diodes are used to protect highly sensitive electronic devices from voltage surge. In normal conditions, these diodes are reverse biased and don't conduct. When there is any surge of high voltage occurs, current starts to flowing and they get forward biased.
• Many integrated circuits are incorporated with these diodes which block the high voltage surge and save the sensitive transistors from damaging.

Properties

• This diode features forward surge current of 4A at pulse width 1µs.
• It shows 1A surge current at pulse width of 1s.
• Operating junction temperature of 175 C.
• Maximum repetitive reverse voltage of 100V.
• Maximum power it can dissipate is 500mW.
• Forward voltage of 1V at 10mA.
• Reverse recovery time of 4ns.

Features

• It shows high conductance in one direction only. It blocks the current in other direction.
• This signal diode is highly reliable and come with low cost.
• Fast switching speed makes the function of this diode incredibly simple.
• Used for general purpose switching applications.
• It is AEC-Q101 qualified and highly durable.

Absolute Maximum Ratings

Following figure shows the absolute maximum rating of 1n914 small signal diode.

• It is important to note that if stresses are exceeded above absolute maximum ratings, they can damage the device.
• Similarly if stresses are applied for extended period of time, they can effect the device reliability.
• These absolute maximum ratings are the limiting values above which the diode serviceability may be affected.

Applications

• It is widely used in industrial applications.
• Power management and portable devices use this type of diode.
• It is useful for the demodulation of AM (amplitude modulated) radio signal. Actually AM signal mainly contains alternately positive and negative peaks of the carrier wave. The amplitude of these signal is directly proportional to original audio signal. Function of diode is to rectify the AM signal which ultimately leaves behind the original positive cycles of the carrier waves. Filter is used to extract the audio signal from this rectified carrier wave and then fed into the amplifier that produces sound waves.
• Diodes are incorporated with other components to make AND and OR logic gates.
• These diodes are widely used as a temperature sensing device because forward voltage drop is highly dependent on temperature.

That's all for today. I hope you have enjoyed the article. For your convenience, I always try to give information in sorted form so you can digest the information without much effort. However, if still you feel skeptical or have any question about understanding the concept of this diode, I'd love to help you in this regard according to best of my expertise. Your suggestions and feedback will be highly appreciated. Stay Tuned!

Introduction to 2n3053

Hey Guys! I hope you are doing great and having fun. Today, I am going to give you the details on the Introduction to 2n3053. It is an NPN bipolar junction transistor which is mainly designed for amplification and switching applications. It consists of P doped semiconductor that exists between the two N doped layers. I'll give you a brief details about this transistor so you don't have to go anywhere to finding information regarding this transistor. Let's get started.

Introduction to 2n3053

• 2n3053 is an NPN bipolar junction transistor which is mainly used for general purpose amplification and switching purpose.
• It consists of three terminals called emitter, base, and collector. and comes in TO-39 Metal Can Package.
• This NPN transistor exhibits low leakage current, high breakdown voltage and low capacity and beta value which are useful over a wide range of current.
• As it is an NPN transistor, so base will be positive with respect to emitter.
• Sometimes it is called current controlled device because small current at the base side is used to control large current at the emitter and collector side.

• It is called BJT(bipolar junction transistor) because conduction is done by the movement of both electrons and holes but majority charge carriers will be electrons.
• When we apply positive voltage at the base side, it gets biased and then it handles the current at the emitter and collector side.
• The ability of base to control number of electrons is used for amplification purpose.
• P terminal of the transistor is behaved like base and other two N terminals represent emitter and collector respectively.
• The emitter emits the electrons which are then controlled by base and collected by collector.

2n3053 Pinout

2n3053 is an NPN transistor which mainly consists of three terminals. 1: Emitter 2: Base 3: Collector

• Transistor action is triggered by the free movement of electrons from its base side.
• These free electrons act like a bridge between emitter and collector.

Circuit Diagram of 2n3053

The Circuit diagram of 2n3053 is shown in the figure below.

• In order to flow current from emitter to collector, base voltage must be positive with respect to emitter.
• The current at the emitter side is the sum of current at the base and collector side.
• Forward current gain is the ratio between collector current to base current and it is denoted by beta ß. Beta is a ratio between two current so it has no unit.
• This beta value is sometimes referred as an amplification factor i.e. it is used for amplification purpose.
• Beta value ranges between 20 and 1000 but standard value of beta is 200.
• Current gain of the transistor is represented by alpha a. It is a ratio between collector current and emitter current. Alpha value exists between 0.95 to 0.99 but most of the time alpha value is considered as unity.

Absolute Maximum Ratings of 2n3053

• Absolute maximum rating of 2n3053 is shown in the figure below.

• Collector-Base and Collector-Emitter voltages are 60V and 40V respectively.
• The maximum power it can dissipate is 5W.
• It is important to note that if stresses are exceeded from given absolute maximum ratings, they can damage the device.
• Also, if stresses are applied for extended period of time, they can effect the device overall reliability.
• This bipolar junction transistor mainly consists of silicon semiconductor that's the reason it is mostly referred as Switching Silicon Bipolar Transistor.

Main Difference between NPN and PNP transistors

• Main difference between NPN and PNP transistors are the charge carriers.
• In case of NPN transistor majority charge carriers are electrons while majority charge carriers are holes in case of PNP transistors.
• Most of the professional prefer NPN transistors over PNP transistors, because conduction through mobility of electron is better than mobility of holes.

Applications

• This transistor is mainly used for general purpose amplification.
• It is widely used as a simple switch. Actually, conduction starts between emitter and collector when voltage is applied at the base side. When there is no bias voltage at the base side, the switch will be OFF. If voltage is present at the base side, switch will be ON.

That's all for today. I try my best to give information sorted out in easy and small steps so you can easily digest the information without much effort. If you have any doubt or feeling skeptical about the working of this transistor you can ask me in the comment section below. I'll try my best to help you according to best of my expertise. We always love when you keep coming back for what we have to offer. Stay tuned!

Introduction to 2n2646

Hey Fellas! I always come with unique topics to whet your appetite with valuable information so you can excel in your relevant field. Today, I am going to unlock the details on the Introduction to 2n2646. It is a uni-junction transistor which is mainly used in thyristor triggering circuits, sensing circuits, and pulse and timing circuits. It features low peak point current of about 5µA, and low emitter reverse current of 0.005µA and passivated surface for uniformity. Let's dive in the details of this transistor and explore what it does and what are its main applications? Let's get started.

Introduction to 2n2646

• 2n2646 is a three terminal semiconductor device that contains only one junction that behaves like an electrically controlled switch.
• This uni-junction transistor (UJT) can not be used as a linear amplifier but it is widely used in triggered oscillators, free-running oscillators, and pulse generation circuits of low frequencies.
• It is composed of n-type semiconductors where p-type material is embedded along its length that helps in fixing the parameter like intrinsic stand off ratio which can be denoted as ?.
• Typical uni-junction 2n2646 contains three terminals named as emitter(E), base 1(B1) and base 2(B2).
• Sometimes it is also referred as a double base diode.
• The base is composed of lightly doped n-type silicon. The emitter is heavily doped and contains p-type material.
• The name of the device is based on the single junction formed between n-type and p-type material.
• When the emitter is behaved as open-circuit, the resistance between B1 and B2 is called inter-base resistance.

• The emitter junction is closed to B2 than B1, so this device doesn't encompass a symmetrical structure.
• Only a fraction of current will flow from B1 to B2 when there is no potential difference between emitter and base terminals.
• However, if large voltage is applied at the emitter terminals then a very large current will flow from B1 to B2 which ultimately generates larger B2 output current.
• The structure of this UJT is quite similar to N-Type JFET, but the gate surface in N-Type JFET is much larger than the emitter junction in UJT.
• This UJT normally functions when emitter junction is forward biased while JFET normally functions when gate junction is reversed biased.
• It is also referred as a current controlled with negative resistance.

2n2646 Pinout

2n2646 is mainly composed of three terminals. 1: Emitter 2: Base1 (B1) 3: Base2 (B2)

• This 2n2646 is designed for industrial applications where circuit economy is taken into consideration.
• It is an ideal choice for firing circuits that are widely used in silicon controlled rectifiers.

Working of 2n2646

• When this device is triggered it allows the emitter current to increase until it is limited by the help of emitter power supply.
• It can be used as an oscillator because it exhibits a negative resistance.
• This UJT gets biased when positive voltage is applied between the two bases. It will cause a potential drop in the device.
• The current will start to flow from emitter to base region, when emitter voltage is exceeded one diode voltage above the voltage where diffusion of P-type material occurs.
• This additional current at the base region allows the resistance between emitter and B2 lead to decrease, hence overall improves the conductivity of the device.
• This resistance drop will make the emitter junction forward biased which helps in injecting the more current.
• This drop in resistance makes the device operate over negative resistance that's why it is useful for oscillator circuits.

Absolute Maximum Ratings

Absolute maximum ratings of 2n2646 is shown in the figure below.

• Stresses above than the given values can damage the device.
• Also if stresses are applied for extended period of time above normal operating values, they can effect the device reliability.

Electrical Characteristics

Electrical characteristics of 2n2646 are shown in the figure below.

• It is important to note that these electrical characteristics don't effect the performance of the transistor.
• The 2n2646 is mainly manufactured for the purpose where low peak point emitter current, and low emitter leakage current is required.

Applications

• 2n2646 is mainly used in pulse and timing circuits.
• It is a building block of thyristor triggering and sensing circuits.
• Free-running oscillators and pulse generation circuits with low frequencies use this UJT because it exhibits negative resistance.

That's all for today. I always try to sort out information into small steps so you can digest the information easily. I hope you have enjoyed the article and got a clear idea what this UJT does and what are its main applications? However, if still you feel skeptical or have any doubt you can ask me in the comment section below. I'll help you according to best of my expertise. Stay Tuned!

Introduction to 2n4403

Hi Everyone! I hope you are doing great and enjoying your life. I am back to give you daily dose of information so you can grow and progress in your relevant field. Today, I am going to give you the details on the Introduction to 2n4403. It is basically PNP(Positive-negative-Positive) bipolar junction transistor where N doped layer is sandwiched between the two P doped layers. It comes in plastic TO-92 compact casing. I'll try to give you brief details about this transistor so you don't need to go anywhere for finding the information regarding this transistor. Let's get started.

Introduction to 2n4403

• 2n4403 is a PNP bipolar junction transistor where conduction is carried out by the movement of holes and electrons but majority charge carriers will be holes.
• It consists of three terminals named as emitter base collector. N layer represents the base of the transistor while other two layers represent emitter and collector respectively.
• It works similar to NPN transistor where small amount of current at the base side is used to control the large current at the emitter and collector side.
• As it is a PNP transistor so base terminal will be negative with respect to emitter.

• Most of the transistors behave like a switch because when we apply small voltage at the base side, it is used to control the large current at the emitter and collector side and switch will be considered ON.
• When there is no bias at the base side the switch is considered OFF.
• PNP transistors also known as current controlled device because small current at the base side is used to control the large current at the emitter and collector side.

2n4403 Pinout

2n4403 is a bipolar junction transistor which consists of three terminals. 1: Emitter 2: Base 3: Collector

• The small current that leaves the base will be amplified at the collector output.
• This PNP transistor will only conduct if base is negative with respect to emitter terminal.

2n4403 Circuit Symbol

Circuit symbol of 2n4403 is shown in the figure below.

• PNP transistor can be considered normally OFF, but negative voltage at the base side and small out put current can turn it ON and helps in flowing large emitter-collector current.
• PNP will only conduct when voltage at the collector side Vc is much smaller than voltage at the emitter side Ve.
• Current at the emitter side is the sum of current at the base and collector side.

Absolute Maximum Ratings of 2n4403

Absolute maximum ratings of 2n4403 is shown in the figure below.

• It is important to note that if stresses are exceeded from absolute maximum ratings, they can damage the device.
• Similarly if stresses are applied for extended period of time above the normal operating condition, they can effect the device reliability.

Transistor as a Matched Switch

• In most of the cases PNP transistors widely replace NPN transistors and they can also be used as a switch.
• You may come across a question what do we use PNP transistors while NPN can be widely used for switching and amplification purpose. However, when we combine these two different types of transistors, they come with a lots of advantages.
• Class-B amplifiers are incorporated with two pairs of PNP and NPN transistors, where both transistors are used to control the direction of current flowing in both directions at any time.
• Transistors are termed as “Complementary Transistors” which use both NPN and PNP transistor of identical characteristics.
• Both transistors, in Class B-amplifiers,  work in a similar way i.e. PNP transistor conducts for the negative half cycle of the transistor while NPN transistors conducts for the positive half cycle. This results in flowing the power at the load out put in both directions. PNP transistors will switch on when it sinks current to its base side and it will switch off when current at the base side stops to flow.

Difference between PNP and NPN transistors

• Both NPN and PNP transistor features same characteristics with some exceptions.
• In case of PNP all the voltage polarities and current directions will be reversed as compared to NPN transistors and majority charge carriers will be holes in case of PNP transistors.
• Also PNP transistor will sink current at the base side while in case of NPN transistor it sources current through its base.
• The base gets biased with the addition of negative voltage which then controls the large amount of current at the emitter and collector side.
• Some professionals prefer NPN transistor over PNP transistors because conduction due to mobility of electrons is considered better than the mobility of holes.

Applications

• PNP can also be used as voltage and power amplification purpose.
• When NPN transistors are incorporated with PNP transistors, they construct a perfect bond through which current flows alternately from both sides of NPN and PNP transistors.

That's all for today. I hope you got benefited by the information about this transistor. If you feel any doubt or have any question you can ask me in the comment section below. I'd love to help you in this regard. We always love when you keep coming back for what we have to offer. Stay tuned!

Introduction to 2n3819

Hi Everyone! We always enjoy when you keep coming back for what we have to offer. I try my best to keep you updated with some information relating to your field so you don't feel overwhelmed and exhausted and visit our website with regular intervals. Today, I am going to uncover the detail on the Introduction to 2n3819. It is an N-Channel JFET which comes in TO-92 envelop and is widely used for general purpose amplification and analog switching. I'll give you a brief details about this JFET so you don't need to go anywhere for finding the information regarding this transistor. Let's get started.

Introduction to 2n3819

• 2n3819 is an N-Channel JFET(Junction Field Effect Transistor) which is mainly used for general purpose amplification and analog switching.
• It contains three terminals named as gate, drain and source.
• There are two types of JFET i.e N channel and P channel JFET. As it is an N-Channel JFET so conduction will be carried out by the movement of electrons.
• Unlike BJT(Bipolar junction transistor), this N-Channel JFET is a uni-polar device because conduction is carried out by single charge carriers i.e electrons.
• Three terminals source gate and drain are the analogous of emitter base and collector of BJTs.
• 2n3819 is a low-cost device which exhibits high performance at mid-to-high frequencies.
• It shows low leakage and noise and exhibits high gain at 100 MHz.
• Conduction will be achieved when electrons will emit from the gate and are collected by the drain terminal.

• There exists a conduction path between source and drain which is termed as channel.
• This JFET is also termed as voltage control device because small voltage at the gate terminal is used to control the conduction between source and drain terminals.
• The increase in initial input voltage at the gate terminal will help in increasing the channel path between source and drain terminals which ultimately increases the overall conductivity of the channel.
• This JFET can be used as voltage controlled resistors, amplifiers, and electronically controlled switches.
• It exhibits large input impedance up to thousands of ohm hence it doesn't effect the external components that we attach to its gate terminal.

2n3819 Pinout

2n3819 mainly consists of three terminals. 1: Source 2: Gate 3: Drain

• Current will from flow from source to drain.
• It is a voltage control device  and gate draws no current.

Working of N-Channel 2n3819

• There exists a conduction path between source and drain.
• The amount of electric charge can be controlled passing through the channel.
• By liming the area of channel path we can limit the charge flow from source to drain terminals.
• Conduction channel is made using the field effect. When a positive voltage is applied at the gate and source terminals it helps in reverse biasing the gate-source pn-junction, which ultimately enlarges the depletion region.
• Following figure shows the P-Type gate is diffused in the N-Type material which forms the reverse biased pn-junction. 

• This pn-junction will create a depletion region around the gate terminal.
• It is called depletion region because no charge carriers exist in this region.
• This depletion region will create a potential gradient around the pn-junction, and helps in limiting the flow of current between channel from source to drain by reducing the width of the conduction channel.
• N-Channel JFET sometimes referred as depletion mode devices when there is no voltage applied at the gate terminal.
• The conduction from source to drain will stop when depletion layer exceeds the width of the conduction channel.
• The point at which conduction stops is called pinch off region.
• Pinch off value is different for different transistors.
• In order to switch off this N-Channel JFET, negative gate-source voltage is required Vgs.

Absolute Maximum Ratings of 2n3819

Absolute maximum rating of 2n3819 is shown in the figure below.

• It is important to note that if stresses are exceeded from the given absolute value, they can harm the device.
• Also, if stresses are applied for extended period of time above the normal operating conditions, they can effect the device reliability.

Applications

• 2n3819 is widely used for high frequency amplifier.
• It can be used in low capacitance switches.
• For general purpose amplification and analog switching we use this N-Channel JFET.

That's all for today. If you have any question or query you can ask me in the comment section below. I'll try my best to help you according to best of my expertise. Your feedback and suggestion will be highly appreciated. They will help us provide you quality work that resonates with your needs and requirements. Stay tuned.